Kick stream analytics: how to read peak and average viewers
Published 1 November 2026
Kick stream analytics start with two numbers for each broadcast: its peak viewers and its average viewers. The peak is the most viewers seen at one moment, and the average is the typical count across the whole stream. On a KickStatz channel page, both come from sweeps, which are checks of Kick's public API every 10 minutes. You can read them for channels you don't run, too.
What a channel page shows
Type a channel name on the channel page and KickStatz opens its overview. The top of the page holds seven figures.
- Viewers now is the count from the latest sweep, or "Not shown" when Kick returned no count.
- Active subscribers comes from Kick's public channel data and includes gifted subscriptions.
- Peak viewers is the highest count seen across the channel's recorded streams, up to the last 30.
- Avg, last 5 streams and Avg, last 10 streams take each stream's average and average those. Streams with no count shown are skipped.
- Streams recorded is how many streams the page holds, up to 30.
- Top category is the category with the most streamed time in those streams.
Below the figures sit a chart of average viewers per stream, bars of streamed time by category, and the 5 most recent streams. The chart appears once 3 streams have a viewer count. The page has no follower figure, since Kick's public API doesn't include follower counts.
Why is the peak so much higher than the average?
A peak is one moment. The average is the mean of every sweep that saw a count. A raid or a busy spell can lift one sweep far above the rest.
Say a stream is live for 1 hour and six sweeps see it, with counts of 40, 60, 80, 260, 80 and 80.
- The peak is 260, the highest single count.
- The average is 100, because the six counts add up to 600 and 600 ÷ 6 is 100.
- Watched hours is 100, the average multiplied by 1 hour.
Now say the fourth sweep had returned 0 instead of 260. Kick's API returns 0 both for a hidden count and for an empty stream, and its docs don't say which applies. KickStatz leaves that sweep out, so the average uses five counts (340 ÷ 5 = 68) and the peak drops to 80.
A wide gap between the peak and the average means the crowd came in a short burst. A narrow gap means the audience stayed close to its usual size.
Reading the stream history table
The Stream history tab lists up to 30 recorded streams, newest first. Each column means one thing.
| Column | What it shows |
|---|---|
| Started | When Kick says the stream began |
| Stream | The title and category |
| Live for | From Kick's start time to the final sweep that saw the stream; ≈ marks a stream that ended less than 10 minutes after that sweep |
| Peak | The highest count any sweep saw |
| Average | The mean of the counts that were shown |
| Watched hours | The average multiplied by the hours live |
| Sweeps | How many sweeps saw the stream |
For a Kick stream analysis of one broadcast, check the Sweeps column first. A stream seen by 3 sweeps rests on 3 snapshots, so one odd count moves its average a lot. A stream seen by 30 sweeps gives a steadier figure.
"Not shown" in the Peak or Average column means no sweep saw a count for that stream. You can sort the table, for example to put the highest averages at the top.
A Kick channel analysis in five checks
- Compare the two averages. If the last 5 streams average more than the last 10, the newest streams drew more viewers than the five before them.
- Look at the chart. A line that climbs over many streams says more than one good night.
- Check the gap between peak and average. One very high peak beside a modest average points to a single busy moment.
- Read the category bars. The bars show where the channel spends its streamed time, so you can match a strong stream in the table to its category.
- Weigh watched hours against length. The same watched hours can come from a short stream with a big crowd or a long one with a small crowd.
None of these checks says why the numbers moved. Each one shows what changed, so you know which streams to look at more closely.
How these figures compare with Kick's Peak CCV and Average CCV
Kick's own analytics use the names Peak CCV and Average CCV, for concurrent viewers. Kick defines Peak CCV as the highest number of concurrent viewers recorded at any single moment in the selected period.
A KickStatz sweep is a snapshot every 10 minutes. A spike that starts and ends between two sweeps never shows up. A KickStatz peak can then sit below Kick's Peak CCV for the same stream. Averages built from snapshots can differ a little from Kick's too.
Kick's figures are private to the streamer unless they share a Media Kit. KickStatz figures are its own measurements from public data, and the how it works page sets out the method behind each one.
The Kick analytics ecosystem, broken down
Kick streamer analytics come from four kinds of place, and each answers a different question.
| Source | Who can see it | What it covers |
|---|---|---|
| Kick Creator Dashboard, Analytics | The streamer only | Peak CCV, Average CCV, Hours Watched, Unique Viewers, chat and follower figures over 7 to 90 days, plus each stream from the past 3 months |
| Kick Media Kit | People the streamer sends the link to | A read-only view of the streamer's analytics, through a link that lasts 30 days |
| Public stats sites, such as KickStatz | Anyone | Figures measured from Kick's public API, such as live viewers, per-stream peaks and averages, and categories |
| On-stream widgets, such as Streamlabs' viewer counter | Viewers of the stream | A live viewer count shown on screen |
If you stream, Kick analytics in the dashboard hold figures KickStatz doesn't have, such as chat messages and followers gained. A public stats site helps when you want to look at channels other than your own.
Questions
What is Kick analytics mainly used for in streaming?
Kick's analytics show a streamer how their streams went. The figures cover viewers at peak and on average, hours watched, chat activity and new followers. The Overview compares periods of 7 to 90 days, and the Streams screen covers each stream from the past 3 months.
What is Kick analytics known for?
Kick added analytics to the Creator Dashboard for Verified and Partner streamers first, then for every streamer from July 2026. The figures are private by default, and a Media Kit link is how a streamer shares them.
Can I see Kick analytics stream by stream?
Yes, for your own channel. Kick's Streams screen covers the last 3 months, with key figures for every stream. For any channel, the KickStatz Stream history tab lists up to 30 recorded streams with peak, average and watched hours.
Why does a channel page list so few streams?
KickStatz keeps a finished stream if it reached 5 or more viewers. Once someone looks a channel up through the site's search, every stream it makes is kept.
Why does a stream say "not shown"?
Kick's API sent a count of 0 at every sweep of that stream. A 0 means the streamer hid the count or nobody was watching, and Kick's docs don't say which.
Look up any channel's peak and average viewers on the channel page.